Anycubic Kobra S1 power consumption and print cost
For the Anycubic Kobra S1, average draw while printing is taken as about 135 W. That is roughly 0.135 kWh per hour; at $0.150 per kWh the electricity cost is $0.020 per hour, or $0.203 for a 10-hour print.
- Average draw
- 135 W
- Energy per hour
- 0.135 kWh
- Bed (X×Y×Z)
- 250×250×250 mm
- Build volume
- 15.6 L
- Speed class
- fast
Electricity cost table
These figures use the average draw. Use the price per kWh from your own bill.
| Duration | Energy | $0.100/kWh | $0.150/kWh | $0.250/kWh |
|---|---|---|---|---|
| 1 hour | 0.14 kWh | $0.014 | $0.020 | $0.034 |
| 3 hours | 0.41 kWh | $0.041 | $0.061 | $0.101 |
| 10 hours | 1.35 kWh | $0.135 | $0.203 | $0.338 |
| 24 hours | 3.24 kWh | $0.324 | $0.486 | $0.810 |
Monthly cost
If you print 8 hours a day for 30 days on a Anycubic Kobra S1, you use about 32.4 kWh a month. At $0.150 per kWh that is about $4.86 in electricity.
About these values
135 W is a typical average including heating cycles and idle moments; it is not the maximum rating on the power supply label. Real consumption varies with settings, material (for example a high bed temperature) and room temperature. For an exact figure, measure it with a plug-in watt meter and enter it in the calculator. When Filanomy estimates print time for unsliced files it uses this printer's speed class (fast, about 4.2 mm³/s effective flow).
Calculate cost for the Anycubic Kobra S1: printer, bed and power draw come preset.
Open in the calculatorMore Anycubic models
| Printer | Draw | Bed |
|---|---|---|
| Anycubic Kobra 2 | 100 W | 220×220×250 |
| Anycubic Kobra 2 Pro | 105 W | 220×220×250 |
| Anycubic Kobra 3 | 115 W | 250×250×260 |
| Anycubic Kobra 3 Max | 180 W | 420×420×500 |
Printers with similar consumption
| Printer | Draw | Bed |
|---|---|---|
| Bambu Lab X1 Carbon | 130 W | 256×256×256 |
| Creality Ender-5 S1 | 130 W | 220×220×280 |
| Creality K1 | 140 W | 220×220×250 |
| Prusa Core One | 140 W | 250×220×270 |
Frequently asked questions
How many kWh does the Anycubic Kobra S1 use per hour?
About 135 W on average while printing, which is 0.135 kWh per hour. The real value varies with settings and material.
What does electricity cost for a print on the Anycubic Kobra S1?
At $0.150 per kWh a 10-hour print costs about $0.203. Use the calculator to work it out with your own price.
What is the Anycubic Kobra S1 bed size?
The build area is about 250 × 250 × 250 mm (15.6 liters).