Anycubic Kobra 2 Pro power consumption and print cost
For the Anycubic Kobra 2 Pro, average draw while printing is taken as about 105 W. That is roughly 0.105 kWh per hour; at $0.150 per kWh the electricity cost is $0.016 per hour, or $0.158 for a 10-hour print.
- Average draw
- 105 W
- Energy per hour
- 0.105 kWh
- Bed (X×Y×Z)
- 220×220×250 mm
- Build volume
- 12.1 L
- Speed class
- medium
Electricity cost table
These figures use the average draw. Use the price per kWh from your own bill.
| Duration | Energy | $0.100/kWh | $0.150/kWh | $0.250/kWh |
|---|---|---|---|---|
| 1 hour | 0.11 kWh | $0.011 | $0.016 | $0.026 |
| 3 hours | 0.32 kWh | $0.032 | $0.047 | $0.079 |
| 10 hours | 1.05 kWh | $0.105 | $0.158 | $0.263 |
| 24 hours | 2.52 kWh | $0.252 | $0.378 | $0.630 |
Monthly cost
If you print 8 hours a day for 30 days on a Anycubic Kobra 2 Pro, you use about 25.2 kWh a month. At $0.150 per kWh that is about $3.78 in electricity.
About these values
105 W is a typical average including heating cycles and idle moments; it is not the maximum rating on the power supply label. Real consumption varies with settings, material (for example a high bed temperature) and room temperature. For an exact figure, measure it with a plug-in watt meter and enter it in the calculator. When Filanomy estimates print time for unsliced files it uses this printer's speed class (medium, about 2.8 mm³/s effective flow).
Calculate cost for the Anycubic Kobra 2 Pro: printer, bed and power draw come preset.
Open in the calculatorMore Anycubic models
| Printer | Draw | Bed |
|---|---|---|
| Anycubic Kobra 2 | 100 W | 220×220×250 |
| Anycubic Kobra 3 | 115 W | 250×250×260 |
| Anycubic Kobra S1 | 135 W | 250×250×250 |
| Anycubic Kobra 3 Max | 180 W | 420×420×500 |
Printers with similar consumption
| Printer | Draw | Bed |
|---|---|---|
| Bambu Lab P1P | 105 W | 256×256×256 |
| Artillery Genius Pro | 110 W | 220×220×250 |
| Bambu Lab P1S | 110 W | 256×256×256 |
| Creality Ender-3 V2 | 110 W | 220×220×250 |
Frequently asked questions
How many kWh does the Anycubic Kobra 2 Pro use per hour?
About 105 W on average while printing, which is 0.105 kWh per hour. The real value varies with settings and material.
What does electricity cost for a print on the Anycubic Kobra 2 Pro?
At $0.150 per kWh a 10-hour print costs about $0.158. Use the calculator to work it out with your own price.
What is the Anycubic Kobra 2 Pro bed size?
The build area is about 220 × 220 × 250 mm (12.1 liters).